Crest Audio X20RM Crest 20 Ch 6 Bus Mixer Rack Mount

This item is brand-new, factory sealed.

12 mono inputs + 4 stereo inputs, all w/mic preamps & individual 48V phantom power switches
Built in splitter system on all 20 XLR mic/line inputs w/ground lift switches on each input channel
12 monitor buses that can be configured mono or stereo in pairs
Additional "stereo common input" for sending click or reference tracks to artists on all 12 buses
Four-band mid sweep EQ for mono & stereo input channels
18 dB per octave high-pass filter on mono input channels
Fully balanced XLR outputs & XLR balanced bus inputs
Solo link system compatible w/other X-Series rack mixers
10-space rackmount configuration
Overview
The Crest Audio X-Series is regarded as the most sonically accurate & operationally quiet, professional-level rack-mountable console range in the audio industry. w/high-end performance & rock-solid construction, the XSeries features a modular design & an extensive feature set suitable for any application. Available in main & monitor configurations, X-Series models feature up to 14 mono & four stereo inputs. Long-throw faders, versatile four-band semi-parametric EQ, channel inserts & high-quality microphone preamplifiers are standard. The X 18R & X 20R consoles have six configurable aux buses & three main buses that provide plenty of front-of-house mixing configurations, while the X 18RM & X 20RM have up to 12 mono or six stereo mix buses for floor or in-ear monitoring.
Frequency response: 20 Hz-20 kHz * +0/-1 dB Any input to any output (Ref 1kHz)
T.H.D. + noise: Any output <0.01% THD 20 Hz to 20 kHz at +15 dBu out
Noise: (22 Hz to 22 kHz Bandwidth) Mic EIN: <-128 dBu (Measured at +60 dB gain, 150 ohms source)
Bus Noise: Below -85 dBu (w/32 Channels Routed)
Crosstalk: Channel Mute >90 dB
Channel Routing >80 dB
Channel fader attenuation >90 dB
Aux Send attenuation >85 dB
Phase shift: <+/-30 degrees 20 Hz to 20 kHz Mic in to Main out
XLR inputs: XLR 4k Ohms Balanced
Max voltage gain: Max voltage gain to mix outs = 92 dB
Line-in TRS: 10 k ohms balanced
XLR/TRS com input: 10 k ohms balanced
Bus inputs: 10 k ohms balanced
Mix outputs: XLR, 100 ohms balanced
Monitor outputs: XLR & TRS 100 ohms balanced
Headphones: Stereo, intended to drive > 8 Ohms
Internal power supply: AC Input: 100-240 VAC, 50/60 Hz via 15A IEC Mains connector,
Weight & Dimensions:
X-20RM Inches: 19 X 4.5 X 17.5 MM: 482.6 X 114.3 X 444.5 Weight: 30 lbs 13.6 kg
Dimensions are Width X Depth (Front-to-Back) X Height