Crux Interfacing Solutions DKGM15 Crux Onstar Radio Replacement Interface W/ Swc Retention Video Switcher & D. Din Dash Kit - Gm Clas

This item is brand-new, factory sealed.

• Product Feature: Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio ; Retains OnStar and chime functions.
• Pre-programmed to retain factory Steering Wheel Controls; Supports Bose, non-Bose and Y-91 audio systems; EIA color coded wiring for easy installation.Includes Double Din Dash kit
• "VEHICLE APPLICATIONS: BUICK: 2004-2005 Century, 2005-2007 LaCrosse, 2004-2007 Rainier, 2003-2007 Rendezvous, 2005-2007 Terraza - GMC: 2004-2011 Canyon 2002-2009 Envoy 2003-2007 Savana 2003-2006 Sierra 2007 Sierra Classic 2003-2006 Yukon - CADILLAC: 2004-2006 Escalade - HUMMER: 2003-2007 H2 2005-2010 H3 - ISUZU: 2003-2008 Ascender - SAAB: 2005-2008 9-7X - SATURN: 2005-2007 Relay"
• CHEVROLET: 2003-2006 Avalanche, 2000-2005 Cavalier, 2004-2013 Colorado, 2004-2007 Express, 2000-2005 Impala, 2001-2003 Malibu, 2000-2005 Monte Carlo, 2003-2004 S-10, 2003-2006 Silverado, 2007 Silverado Classic, 2003-2006 SSR, 2003-2006 Suburban, 2003-2006 Tahoe, 2002-2009 Trailblazer 2005-2008 Uplander, 2003-2005 Venture
• Note: 1. The Front and Rear fading are not retained on Y-91 Bose System; 2. The OnStar volume output is defaulted to low gain; 3. Does not retain rear seat volume controls.

The CRUX DKGM-15 is a premium interface for select General Motors Class II Vehicles. It facilitates the integration of an after-market radio to fully retain OnStar other factory features in GM Class II Data bus vehicles for Bose Amplified and Non-Amplified Systems. A double DIN radio replacement dash kit is included in the kit to make the installation quick and easy. The DKGM-15 interface is also pre-programmed for retention of steering wheel controls. DASH KIT INSTALLATION: A Double DIN radio replacement dash kit is included in the kit to make the installation quick and easy. Please make sure that you have all the parts written below (1) Main trim ring (1) Left ISO mounting bracket (1) Right ISO mounting bracket ONSTAR VOLUME ADJUSTMENT: To adjust the OnStar volume, turn on OnStar and adjust the volume using the Steering Wheel Control volume SELECTING THE AUDIO SYSTEM: If the vehicle is equipped with an amplified Audio System, the DKGM-15 has a built-in audio level adaptor that outputs the proper audio level from the aftermarket radio to the factory amplifier. To use this feature plug in the male 8-pin connector on the DKGM-15 harness to the GRAY female 8-pin connector on the DKGM-15 module. The module is also labeled Bose and Non Bose to avoid confusion. If the vehicle is NOT equipped with a factory amplified system, plug in the male 8-pin connector to the BLACK female 8-pin on the DKGM-15 module. CHIME VOLUME ADJUSTMENT: The DKGM-15 has a potentiometer to adjust the chime volume. It is set at half way by default. To adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase the volume and counter-clockwise to decrease the volume.