Cudy POE200 30W Gigabit PoE+ Injector

This item is brand-new, factory sealed.

IEEE 802.3at/af. Max 30W Output.

Provides up to 30W of power in standard 802.3at/af PoE protocol, suitable for powering access points, surveillance cameras, and other PoE clients.


10/100/1000 Mbps Speeds

Stream data at full speed for bandwidth-intensive clients such as access points and 4K cameras with no performance loss.


Protect Clients with Outstanding EMC

Robust EMC design protects itself and clients from power surges and ESD.

ESD: Contact 6kV; Air 8kV

Surge: Power DM 4kV, CM 4kV; RJ45 CM 4kV


Built to Last Longer with High-Quality Capacitors

Equipped with high-quality capacitors rated for 1.6 longer lifespan than the industry average, making the PoE adapter more resistant to aging and wear.


Auto Negotiating the Power Needed

Connect the power, switches/routers, and clientsthe adapter will automatically detect the required power wattage and deliver it accordingly.


Wallmount Ready

Features two mounting holders, allowing you to firmly mount it on the walls. Model Version
POE200 2.0 Protocols
802.3 Protocols
802.3i 10 Mbps over Twisted Pair
802.3u 100 Mbps over Twisted Pair
802.3ab 1 Gbps over Twisted Pair
802.3af PoE
802.3at PoE PoE
Uplink Stream
1x GbE

Downlink Stream
1x GbE, 802.3at/af

Downlink Pin Assignment
Mode A

Transimission Distance
Cat. 5e or higher cable: 100 meters at Gigabit
Note: Total cable length from the uplink switch through the PoE adapter to the downlink device is measured as one segment Interfaces
Physical Buttons
Reset Button

LED
Power

Power Interfaces
AC Inlet Power
Power Methods
AC

Power Input
100-240 ACV 50/60Hz 0.8A

Max Power Output
30W, 54V Direct Current 0.56A Reliability
Power Protection
Surge Protection
ESD Protection
Overvoltage Protection
Short-Circuit Protection

EMC
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV, Air: 8kV
IEC/EN 61000-4-5, Above Level 4 Surge: Power: DM 4kV, CM 4kV, RJ45: CM 4kV

Grounding Methods
Three-Prong Plug

Environment
Ambient Operating Temperature: -10 to 40 ^oC (14 to 104 ^oF)
Storage Temperature: -40 to 70 ^oC (-40 to 158 ^oF)
Operating Humidity: 10% to 90% non-condensing
Storage Humidity: 10% to 95% non-condensing Certifications
FCC, CE Mechanical
Installation
Desktop
Wall-mount

Casing Material
Plastic Package Content
POE200
Power Cord
Mounting Kit
Installation GuideItem Dimension (L inchxW inchxH inch)
7 x 3 x 3

Weight
1.00 lb

Warranty Information
2 years