Eaton Tripp Lite Series DisplayPort over Cat6 Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, Power over Cable, 230 ft. [70 m], TAA (b127a-1a1-bdbda)

This item is brand-new, factory sealed.

Tripp Lite DisplayPort Over Cat6 Ethernet Extender, Transmitter/Receiver Kit, Up to 230 Feet / 70 Meters, 4K@60Hz Video, 4:4:4, Power Over Cable, TAA Compliant, 1-Year Warranty (B127A-1A1-BDBDA)

• DISPLAYPORT EXTENDER: Extends 4K signals from a DisplayPort source to a monitor up to 230 feet via user-supplied Cat6 cabling. Add a B127A-010-H repeater or B127A-110-BH transceiver (both sold separately) to extend the signal up to 400 or 460 feet.
• CRYSTAL-CLEAR QUALITY: Supports UHD 4K@60 Hz with various audio options. HDR provides vibrant colors and rich contrast. HDCP 2.2 ensures no loss in quality. Supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a monitor.
• BUILT-IN PoC: Power over Cable technology powers either the transmitter or receiver over Cat6 cable. Connect the power supply at either end to power both sides. LEDs on both the transmitter and receiver indicate power and signal transmission.
• PLUG-AND-PLAY: No software required. Includes mounting hardware for wall, pole, or server rack. Connect the transmitter to the source and the receiver to the display with DisplayPort cables. Connect the units with Cat6 cable. Cables sold separately.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a manufacturer's 1-Year Limited Warranty and is supported by Eaton's expert technical support team over phone and email.

• Brand: ?Tripp Lite
• Item Weight: ?1.68 pounds
• Package Dimensions: ?10.24 x 6.46 x 2.17 inches
• Color: ?Black
• Manufacturer: ?Tripp Lite

DisplayPort Extender for Digital Signage in Schools, Trade Shows and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional AV cables allow.

Extends a 4K AV Transmission up to 230 ft.
The B127A-1A1-BDBDA extends 4K signals from a DisplayPort source to a DisplayPort monitor up to 230 feet (70 meters) away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH transceiver (both sold separately) to the application, you can extend the signal up to 400 feet (122 meters) or 460 feet (140 meters), respectively.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-BDBDA supports Ultra HD 4K resolutions up to 3840 x 2160 at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization allows you to fine-tune the image quality at the remote display. HDCP 2.2 encryption allows you to stream 4K content with no complications. This extender kit also supports uncompressed 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable (such as P568- or P569-Series). This port does not support multi-resolution capabilities, so the connected monitor must also support 4K at 60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers either the transmitter or receiver over Cat6 cable. Connect the included power supply at either end to power the entire installation. LEDs on both the transmitter and receiver light up to indicate the system is receiving power and a signal is being transmitted. PoC helps you avoid the hassle of a bulky power brick and gives you the freedom to place one end where needed without worrying about finding a nearby AC outlet.

DIP Switches Extend Your Choice of USB or IR
The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source and the receiver to the display with user-supplied DisplayPort cables (such as P580-Series). Then, connect the two units with user-supplied Cat6 Ethernet cable (such as N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BDBDA is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Package Contents:

• DisplayPort over Cat6 Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, Power over Cable, 230 ft. (70 m), TAA
• External power supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A) with 4.5 ft. (1.4 m) cord
• 4x International plug adapters (North America, Europe, U.K. and Australia)
• Mounting hardware
• Owner's manual