Eminence N314T16 N314T-16 1.4" Throat HF Compression Driver

This item is brand-new, factory sealed.

Description The 1.4 in. exit N314T-16 sets a new standard in compression drivers from Eminence. Featuring D3 technology (Damped Diametric Drive), a 3 in. voice coil, and lightweight neodymium ring magnet with copper shorting ring, the N314T-16 offers an ultra-clean sound and low crossover point. Specifications Download Spec Sheet SPECIFICATION Throat Size 1.4", 35.6mm Nominal Impedance* 16? Minimum Impedance 13.1 ohm @ 4.4 kHz Power Rating** 100 W (AES) Resonance 0.729kHz Usable Frequency Range 800Hz-20kHz Recommended Crossover 800 Hz / 12 DbkHz Sensitivity*** 110.6 Magnet Material Neodymium Magnet Weight 11oz, .31kg Voice Coil Diameter 3" / 76.2mm Voice Coil Former Polyimide Diaphragm Material Titanium DC Resistance (Re) 10? MOUNTING INFORMATION Overall Diameter 5.72", 145.3mm Driver Volume Displaced 0.02 cu.ft., 0.66 liters Depth 2.53", 64.3mm Weight 4.8 lbs, 2.2 kg Mounting Thread N/A Mounting Holes Diameter 4X 1/4-20 Mounting Holes B.C.D. 4 in. 101.6 mm Frequency Response Footnotes Eminence Speaker Footnotes From dialing a sound in, to rocking it out, Eminence professional audio and musical instrument loudspeakers have been the leading choice in audio applications worldwide since 1966. Eminence is dedicated to providing the best quality, value and service to meet your needs. Nowhere is that mission more evident than in their wide product selection, industry leading seven-year warranty, and unrivaled customer support. Designed and assembled by hand in the USA, Eminence is the most trusted name in the industry. Find out why the worlds premier brands and countless audio enthusiasts and musicians rely on Eminence. Emininece Speaker Tech Notes Multiple units exceed published ratings evaluated under EIA 426A specification while tested in a free-air, non-temperature-controlled environment. Multiple compression drivers exceeded published ratings evaluated under EIA-426A or AES specification while mounted on Eminences H290, H290S, or H2EA horn in a non-temperature-controlled environment. Eminence Speaker freequency response curves are generated by the average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e: 2.83V/8?, 4V/16?. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). Compression drivers were tested using a 2ft x 2ft baffle built into the wall with horn front mounted. Please note: BETA 8CX, 10CX and 12CX are coaxial speakers with tweeter sold separately. The data for these coaxial woofers was calculated with the ASD:1001 driver screwed into the woofer, but not active. Prices, specifications and product cosmetics are subject to change without notice.