Jabsco 36760-0115 4" Continuous Duty Flangemount Blower - 115v, 250 Cfm

This item is brand-new, factory sealed.

4" Continuous Duty Flangemount Blower - 115V, 250 CFM

The Jabsco continuous duty 4-inch flange-mount blower, with a 115 Volt Motor. This is rated for 250 CFM. The Jabsco AC blowers are ideal for ventilating equipment areas. They may also be used for engine room ventilation on vessels with diesel-powered engines only. The blower is also suitable for general air circulation when AC power consumption is preferred. Flangemount Blowers are generally mounted with the discharge port fastened directly to a flat external surface to minimize required ducting. The inlet port can then be connected with a duct hose to the area requiring ventilation. Standard models are rated for intermittent service, 15 minutes maximum. These commercial-duty blowers are rated for continuous service. The blower housing flange should be mounted on a flat bulkhead surface. Selection of a dry, cool location will prolong motor life.

This blower is not ignition-protected. Do not use to exhaust flammable vapors such as gasoline fumes, or in areas that may contain flammable vapors.

Specifications:

• Rated for 250 CFM
• 115V
• Extended Life Induction Motor
• Tough Reinforced Thermoset Plastic Housing
• Continuous-Duty Motor with Thermal Overload Protection
• Slip-on Inlet Ducting Connection
• Efficient High Volume Air Flow
• Low Current Draw
• Corrosion-Resistant Materials Throughout