Kingston Server Premier 16GB DDR4 SDRAM Memory Module (KSM26ES8/16HC) KSM26ES8/16HC

This item is brand-new, factory sealed.

KSM26ES8/16HC

16GB 1Rx8 2G x 72-Bit PC4-2666

CL19 288-Pin DIMM

DESCRIPTION

Kingston's KSM26ES8/16HC is a 2G x 72-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, ECC, memory module, based on nine 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP = 2.5V Typical

VDDSPD = 2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

Low-power auto self refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Single-rank

On-board I2 serial presence-detect (SPD) EEPROM

Temperature sensor with integrated SPD

16 internal banks; 4 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

PCB: Height 1.23 (31.25mm)

RoHS Compliant and Halogen-FreeCL(IDD)
19 cyclesRow Cycle Time (tRCmin)
45.75ns(min.)Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)Row Active Time (tRASmin)
32ns(min.)Maximum Operating PowerUL Rating
94 V - 0Operating Temperature
0^o C to +85^o CStorage Temperature
-55^o C to +100^o CItem Dimension (L"xW"xH")
1 x 2 x 7

Weight
1 lb

Warranty Information
Lifetime