Kingston
Kingston 64GB [2x32GB] DDR5 6400MT/s CL32 FURY Beast Black RGB EXPO (kf564c32bbeak2-64)
- SKU:
- 20717648
- MPN:
- kf564c32bbeak2-64
- Availability:
- Out of stock
- Stock Update:
- 12/12/2025 03:47:59 AM PST
- Stock Update:
- 12/12/2025 03:47:59 AM PST
Description
This item is brand-new, factory sealed.
Kingston FURY KF564C32BBEAK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
- Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
- EXPO Profile #0: DDR5-6400 CL32-39-39 @1.4V
- EXPO Profile #1: DDR5-6000 CL30-36-36 @1.4V
- XMP Profile #1: DDR5-6400 CL32-39-39 @1.4V
- XMP Profile #2: DDR5-6000 CL30-36-36 @1.4V
FEATURES
- Power Supply: VDD = 1.1V Typical
- VDDQ = 1.1V Typical
- VPP = 1.8V Typical
- VDDSPD = 1.8V to 2.0V
- On-Die ECC
- Height 1.66" (42.23mm), w/heatsink
Features
Hazard Assessment of Perfluorooctane Sulfonate (PFOS)
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Waste Electrical and Electronic Equipment Directive (WEEE)
Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Specs
| Physical Characteristics | |
| Thickness | 279.9 mil |
| Form Factor | DIMM |
| Length | 5.3" |
| Number of Pins | 288-pin |
| Width | 1.7" |
| Warranty | |
| Limited Warranty | Lifetime |
| General Information | |
| Brand Name | Kingston |
| Manufacturer Website Address | http://www.kingston.com |
| Marketing Information | Kingston FURY KF564C32BBEAK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: FACTORY TIMING PARAMETERS Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V EXPO Profile #0: DDR5-6400 CL32-39-39 @1.4V EXPO Profile #1: DDR5-6000 CL30-36-36 @1.4V XMP Profile #1: DDR5-6400 CL32-39-39 @1.4V XMP Profile #2: DDR5-6000 CL30-36-36 @1.4V FEATURES Power Supply: VDD = 1.1V Typical VDDQ = 1.1V Typical VPP = 1.8V Typical VDDSPD = 1.8V to 2.0V On-Die ECC Height 1.66" (42.23mm), w/heatsink |
| Product Type | RAM Module |
| Product Name | 64GB (2x32GB) DDR5 6400MT/s CL32 FURY Beast Black RGB EXPO |
| Manufacturer | Kingston Technology Company |
| Manufacturer Part Number | KF564C32BBEAK2-64 |
| Product Line | FURY Beast |
| Technical Information | |
| Memory Technology | DDR5 SDRAM |
| Number of Modules | 2 x 32GB |
| Memory Size | 64 GB |
| CAS Latency | CL32 |
| Memory Rank | Dual-rank |
| Memory Speed | 6400 MHz |
| RGB | Yes |
| Memory Voltage | 1.40 V |
| Memory Standard | DDR5-6400/PC5-51200 |
| Error Checking | Non-ECC |
| Signal Processing | Unbuffered |
Warranty Information
