Omnitron Electronics
FlexPoint T1/E1 Fiber Media Converter RJ48 SC Single-Mode 30km 44711
(No reviews yet)
Write a Review
- SKU:
- 20977469
- MPN:
- 4471-1
- Availability:
- Out of stock
- Stock Update:
- 07/03/2025 11:50:07 AM PST
- Stock Update:
- 07/03/2025 11:50:07 AM PST
Description
This item is brand-new, factory sealed.
The FlexPoint T1/E1 is a modular T1/E1 copper-to-fiber media converter that provides reliable and cost-effective extension of devices such as PBXs, CSUs and routers via fiber.
Designed as a transparent repeater, the FlexPoint T1/E1 supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The converter also supports AMI, B8ZS and HDB3 line codes. Manual switch settings with on-the-label descriptions enable easy configuration of T1/E1 line codes and line lengths.
A crossover switch makes it simple to connect the FlexPoint T1/E1 converter to PBXs or CSUs and eliminates the need for crossover and custom cables to connect devices.
The fiber port operates at 1310nm and supports SC or ST connectors. Multimode fiber models support distances of up to 5km, and single-mode fiber models support distances of up to 60km.
- The FlexPoint T1/E1 is a modular copper-to-fiber media converter that supports ANSI, AT&T, ITU and ETSI standards
- Supports AMI, B8ZS and HDB3 line codes
- Fiber port supports multimode or single-mode fiber SC or ST connectors, and distances up to 60km
- Labeled status LEDs and switches for quick and easy installation
- Features a crossover switch for easy connections to PBXs or CSUs
- Local and remote fiber loopback switches with optional all 1's insertion (AIS) to facilitate easy installation
- Equipped with dry relay contacts for connection to alarm equipment
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis
- Completely software independent with no installation of drivers required
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
Package Contents:
- FlexPoint T1/E1
- US Power Supply - 110-120VAC / 60Hz
- User Manual
Features
Package Contents:
Compliance:
Yes
United States
- FlexPoint T1/E1 SC Single-Mode 30km US AC Powered
- US Power Supply - 120Volt / 60Hz
- User Manual
Certifications & Standards:
Compliance:
- UL
- CE
- FCC Class A
Additional Information:
Input Voltage:
- 6-15VDC via 2.5mm barrel (0.5A @ 9VDC)
- 5VDC via Molex connector (0.6A @ 5VDC)
- 100-120VAC/60Hz (0.05A @ 120VAC)
Environmentally Friendly:
Yes
Country of Origin:
United States
Specs
| Power Description | |
| Input Voltage | 120 V AC |
| Physical Characteristics | |
| Form Factor |
|
| Weight (Approximate) | 6 oz |
| Height | 1" |
| Width | 3" |
| Depth | 4" |
| Warranty | |
| Limited Warranty | Lifetime |
| Interfaces/Ports | |
| Network (RJ-45) | No |
| SC Port Type | Duplex |
| Total Number of Ports | 2 |
| USB | No |
| Number of SC Ports | 1 |
| DVI | No |
| Digital Audio | No |
| Digital Audio/Video | No |
| Management Port | No |
| Number of RJ-48 Ports | 1 |
| Parallel Port | No |
| General Information | |
| Brand Name | Omnitron Systems |
| Package Type | Retail |
| Manufacturer Website Address | http://www.omnitron-systems.com |
| Marketing Information | The FlexPoint T1/E1 is a modular T1/E1 copper-to-fiber media converter that provides reliable and cost-effective extension of devices such as PBXs, CSUs and routers via fiber. Designed as a transparent repeater, the FlexPoint T1/E1 supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The converter also supports AMI, B8ZS and HDB3 line codes. Manual switch settings with on-the-label descriptions enable easy configuration of T1/E1 line codes and line lengths. A crossover switch makes it simple to connect the FlexPoint T1/E1 converter to PBXs or CSUs and eliminates the need for crossover and custom cables to connect devices. The fiber port operates at 1310nm and supports SC or ST connectors. Multimode fiber models support distances of up to 5km, and single-mode fiber models support distances of up to 60km. The FlexPoint T1/E1 is a modular copper-to-fiber media converter that supports ANSI, AT&T, ITU and ETSI standards Supports AMI, B8ZS and HDB3 line codes Fiber port supports multimode or single-mode fiber SC or ST connectors, and distances up to 60km Labeled status LEDs and switches for quick and easy installation Features a crossover switch for easy connections to PBXs or CSUs Local and remote fiber loopback switches with optional all 1's insertion (AIS) to facilitate easy installation Equipped with dry relay contacts for connection to alarm equipment Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis Completely software independent with no installation of drivers required Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support |
| Product Type | Transceiver/Media Converter |
| Product Name | FlexPoint T1/E1 SC Single-Mode 30km US AC Powered |
| Manufacturer | Omnitron Systems |
| Manufacturer Part Number | 4471-1 |
| Product Model | 4471-x |
| Product Series | T1/E1 |
| Product Line | FlexPoint |
| Media & Performance | |
| Maximum Distance Supported | 30 km |
| Media Type Supported |
|
| Fiber Mode Supported | Single-mode |
| Fiber Optic Cable Wavelength | 1310 nm |
| Network & Communication | |
| Carrier Supported | T-carrier/E-carrier |
| Network Technology | T1/E1 |
Warranty Information
All Items are Brand New, Factory Sealed and come with a standard warranty. [Read our policies]
View AllClose
FlexPoint T1/E1 Fiber Media Converter RJ48 SC Single-Mode 30km 44711