Permatex
Permatex Inc 29208-CAN The Right Stuff Instant Rubber Gasket Maker, 5 Ounce Cartridge
- SKU:
- 18088965
- MPN:
- 29208-can
- Availability:
- Usually ships the same or next business day. In stock at our CA, MI, PA, WA warehouses.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 07/25/2024 07:17:51 PM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 2 | and pay only $24.78 each 24.78 |
| Buy 3 | and pay only $23.20 each 23.2 |
| Buy 4 | and pay only $21.91 each 21.91 |
| Buy 5 - 9 | and pay only $21.44 each 21.44 |
| Buy 10 or above | and pay only $19.60 each 19.6 |
- Stock Update:
- 07/25/2024 07:17:51 PM PST
Description
This item is brand-new, factory sealed.
The Right Stuff® Gasket Maker - 5oz
Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested.
Applications:
- Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.
- Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover
- Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
Directions:
Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.
NOTE: Not for use as a head gasket or on parts in contact with gasoline.
Warranty Information
