This item is brand-new, factory sealed.
Looking for a silver bullet primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though its designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer; Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.
The original shellac primer/sealertrusted for decades.High-hiding formula covers even the most stubborn and persistent stains.Seals porous surfaces with excellent enamel holdout.Permanently blocks most every kind of odor.Excellent adhesion to all, even glossy, surfacesno scuff sanding required.Dried film is non-toxic and hypo-allergenic.Can be applied in freezing temperatures.
Global Product Type:Building/Construction Paints & Primers
Global Product Type:Building/Construction Paints & Primers Paint Sub-Category:Primer, Shellac-Based
Paint Sub-Category:Primer, Shellac-Based Intended Application Environment:Interior/Exterior
Intended Application Environment:Interior/Exterior Finish/Sheen:Flat
Finish/Sheen:Flat Color(s):White
Color(s):White Color Family:White
Color Family:White Volume Capacity:1 gal
Volume Capacity:1 gal Packaging Type:Bucket/Pail
Packaging Type:Bucket/Pail Binder/Vehicle Ingredient(s):Shellac
Binder/Vehicle Ingredient(s):Shellac Diluent/Solvent Ingredient(s):Denatured Alcohol
Diluent/Solvent Ingredient(s):Denatured Alcohol Diluent/Solvent Ingredient(s):Water
Diluent/Solvent Ingredient(s):Water Application Method:Brush
Application Method:Brush Application Method:Roller
Application Method:Roller Recommended Level of Ventilation:Moderate
Recommended Level of Ventilation:Moderate Application Temperature Range:0 and 90F
Application Temperature Range:0 and 90F Applicable Surface Material:Cement
Applicable Surface Material:Cement Applicable Surface Material:Concrete
Applicable Surface Material:Concrete Applicable Surface Material:Drywall
Applicable Surface Material:Drywall Applicable Surface Material:Glass/Ceramics
Applicable Surface Material:Glass/Ceramics Applicable Surface Material:Masonry
Applicable Surface Material:Masonry Applicable Surface Material:Metal
Applicable Surface Material:Metal Applicable Surface Material:Plaster
Applicable Surface Material:Plaster Applicable Surface Material:Plastic
Applicable Surface Material:Plastic Applicable Surface Material:Wood
Applicable Surface Material:Wood Maximum Coverage Area:500 sq ft
Maximum Coverage Area:500 sq ft Cure/Dry-Time Range:20 min (Touch)
Cure/Dry-Time Range:20 min (Touch) Cure/Dry-Time Range:45 min (Handle, Re-Coat)
Cure/Dry-Time Range:45 min (Handle, Re-Coat) Cure/Dry-Time Range:1-3 Days (Full Cure)
Cure/Dry-Time Range:1-3 Days (Full Cure) Age Recommendation:Ages 16 and Up
Age Recommendation:Ages 16 and Up Product Biodegradability Indicator:N
Product Biodegradability Indicator:N Product Biodegradability in Days:0
Product Biodegradability in Days:0 Product Compostability Indicator:N
Product Compostability Indicator:N Pre-Consumer Recycled Content Percent:0%
Pre-Consumer Recycled Content Percent:0% Post-Consumer Recycled Content Percent:0%
Post-Consumer Recycled Content Percent:0% Total Recycled Content Percent:0%
Total Recycled Content Percent:0% Disclaimer Statement:B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90F (-18 and 32C) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Disclaimer Statement:B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90F (-18 and 32C) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN. Footnote 1:Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 1:Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils Footnote 2:Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Footnote 2:Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils 
