siig
Siig Sc-sa4r12-s Ctrl Serial Ata 4-channel Raid Hi-speed 4 Channel Pci-to-serial Ata Raid Controller (scsa4r12s)
(No reviews yet)
Write a Review
- SKU:
- 21258612
- MPN:
- sc-sa4r12-s
- Availability:
- Usually ships the same or next business day. In stock at our IL warehouse.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 12/13/2025 02:18:36 AM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 2 or above | and pay only $49.32 each 49.32 |
- Stock Update:
- 12/13/2025 02:18:36 AM PST
Description
This item is brand-new, factory sealed.
Serial ATA 4-channel RAID. High-speed 4-channel PCI-to-Serial ATA RAID controllerSupports RAID 0 (stripping), RAID 1(mirroring) and RAID 0+1 (striping and mirroring) for performance and reliabilityThin, flexible Serial ATA cables make it easier to route inside a PCBreaks the 137GB barrier Supports various brands of large capacity Serial ATA hard drivesRegulatory approval(s) - FCC Class B (DoC) and CEPort type - Four Serial ATA portsSlot type - 32-bit PCICompliant with Serial ATA Specification, revision 1.0Compliant with PCI Specification, revision 2.2Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 0+1 (striping and mirroring)Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA hard disksFeatures independent 256-byte FIFOs per channel for host reads and writesFeatures Watch Dog timer for fault resiliency and flash memory for future BIOS updatesSupports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5Gb/s)Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the futureFour high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included. Two Y split power cable is also included to provide extra power connectionSystem Requirements ---Pentium or equivalent PC with one available PCI slot-Windows 98SE/ME/NT4.0/2000/XPPackage Contents ---Serial ATA 4-channel RAIDFeatures
Package Contents:
Yes
PC
China
- High-speed 4-channel PCI-to-Serial ATA RAID Controller
- 4 x Serial ATA Data Cables
- 2 x Dual-connector SATA Power Cables
- 2 x "Y" Split Power Cables
- Driver and Utility Software CD
- Installation Guide
Environmentally Friendly:
Yes
Platform Supported:
PC
Country of Origin:
China
Specs
| Physical Characteristics | |
| Form Factor | Plug-in Card |
| Height | 4.7" |
| Width | 5.2" |
| Warranty | |
| Limited Warranty | Lifetime |
| Interfaces/Ports | |
| Number of SATA Ports (Internal) | 4 |
| Total Number of SATA Ports | 4 |
| General Information | |
| Brand Name | SIIG |
| Manufacturer Website Address | http://www.siig.com |
| Marketing Information | SIIG's Serial ATA 4-Channel RAID host adapter is an ideal solution for expanding your SATA storage capacity to your desktop computer. It is designed to add four SATA channels for connecting up to four additional SATA hard disk drives. This Serial ATA RAID host adapter can be configured as a standard 4 channel host controller or with RAID 0 (striping), RAID 1 (mirroring) or RAID 10 (mirror + striping) for performance, reliability or both respectively. Additionally, it can be used as a boot or secondary controller and will co-exist with most existing on-board Ultra ATA controllers. Features Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability Thin, flexible Serial ATA cables make it easier to route inside a PC Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included Two "Y" split power cables are also included to provide extra power connection |
| Packing | Box |
| Product Type | SATA Controller |
| Product Name | High-speed 4-channel PCI-to-Serial ATA RAID Controller |
| Manufacturer | SIIG, Inc |
| Manufacturer Part Number | SC-SA4R12-S2 |
| Technical Information | |
| RAID Supported | Yes |
| Host Interface | PCI |
| Controller Type | Serial ATA/150 |
| RAID Levels |
|
Warranty Information
All Items are Brand New, Factory Sealed and come with a standard warranty. [Read our policies]
View AllClose
Siig Sc-sa4r12-s Ctrl Serial Ata 4-channel Raid Hi-speed 4 Channel Pci-to-serial Ata Raid Controller (scsa4r12s)
$54.69