Titan
Titan 23140 1/4 In. Drive Beam Type Torque Wrench
- SKU:
- 18092204
- MPN:
- 23140_43
- Availability:
- Usually ships the same or next business day. In stock at our CA, GA warehouses.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 12/05/2025 05:42:03 PM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 | and pay only $24.64 each 24.64 |
| Buy 4 | and pay only $23.48 each 23.48 |
| Buy 5 - 9 | and pay only $22.80 each 22.8 |
| Buy 10 or above | and pay only $20.83 each 20.83 |
- Stock Update:
- 12/05/2025 05:42:03 PM PST
Description
This item is brand-new, factory sealed.
Titan 23140 0-80 in/lb & 0-7 Newton-Meter 1/4 Drive Beam Style Torque Wrench- 1/4'' Drive Torque Beam Wrench
- 0-80 in/lbs. clockwise or counterclockwise measurement
- Deflection beam torque wrenches do not wear or fatigue over the lifetime of the tool insuring increased accuracy
- Directly measure various torque values when tightening fasteners
- Manufacturer: Titan
- Brand: Titan
- Item Weight: 7 ounces
- Product Dimensions: 11 x 4 x 1 inches
- Is Discontinued By Manufacturer: No
- Manufacturer Part Number: 23140
1/4 Dr. Beam Type Torque Wrench 23140 0-80 In/Lbs (0-9 Nm) To ensure accuracy, verify that the pointer is aligned with the 0 calibration mark. The torque beam must float above the scale and not touch the scale at any point. If needed, the torque beam can be repositioned by gently bending back into place. Before attaching torque wrench, hand tighten fasteners until snug. The handle of the torque wrench should be held between index finger and thumb applying force to the center of the handle. Turning motion should slow as resistance increases and stop once the desired torque measurement is met. Torque measurements must be read from directly above the pointer. Do not read measurements from an angled position. For better accuracy, torque measurements should be met while the fastener is in the turning motion.
Warranty Information
