Tripp Lite Gigabit SFP Fiber to Ethernet Media Converter, POE+ - 10/100/1000 Mbps (n785-p01-sfp)

This item is brand-new, factory sealed.

• EXTEND YOUR GIGABIT ETHERNET WITH POE+: This fiber transceiver unit converts a copper Ethernet signal to fiber (and vice versa) to extend both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet connection in your network. Two converters are needed to extend an Ethernet connection.
• EXTEND YOUR NETWORK BEYOND THE LIMITS OF COPPER: Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with multimode fiber cable extender to reach greater distances.
• SUPPORTS SINGLEMODE & MULTIMODE FIBER : Multimode or singlemode fiber converter with SC ends connect the two converters, and copper cabling connects the converter to your desired network components.
• WORKS IN TANDEM WITH NON-POE MEDIA CONVERTERS: The customizable ethernet to fiber converter lets you choose a transceiver that suits your system, while also delivering power to your PoE+ device (Tripp Lite's N286-01GSX-MDLC and N286-01GLX-SLX transceivers sold separately). It connects to a Tripp Lite N785-Series non-PoE media converter using your choice of singlemode or multimode cabling.
• ADVANCED FEATURES: This SFP fiber transceiver supports automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converters Ethernet network and fiber link status at a glance.
• COMMON APPLICATION: This Ethernet to fiber media converter can provide both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.
• 2 YEAR & FREE TECH SUPPORT: This SFP to RJ45 converter is backed by a 2 year limited , and is supported by free Chicago-based tech support in the event of any issues.

• Brand Name: Tripp Lite
• Item model number: N785-P01-SFP
• Item Weight: 1.64 pounds
• Product Dimensions: 2.8 x 3.7 x 1 inches
• Item Dimensions L x W x H: 2.8 x 3.7 x 1 inches

Customizable Media Converter Extends Power and Data to a PoE+ Device via Fiber CableThis economical unit converts a single mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. Works in Tandem with Tripp Lite's N785-Series (Non-PoE) Media ConvertersThe N785-P01-SFP lets you choose a transceiver that suits your system, while also delivering power to your PoE+ device (Tripp Lite's N286-01GSX-MDLC and N286-01GLX-SLX transceivers sold separately). It connects to a Tripp Lite N785-Series non-PoE media converter using your choice of single mode or multimode cabling. It also delivers data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) away using Cat5e/6 cabling (such as Tripp Lites N001- or N201-Series cables). Supports Power over Ethernet to Save You Money and Give You More Installation ChoicesPoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. Supports Auto-Sensing of Network Speed and Other Advanced FunctionsMonitoring and controlling your network nodes is easy with the N785-P01-SFPs advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converters power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors all ports to ensure link status remains active. Completely Plug-and-Play with No Additional Software Required for ConnectionThe compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.

• Gigabit SFP Fiber to Ethernet Media Converter, POE+ - 10/100/1000 Mbps
• External Power Supply with 3.6 ft. Cord and NEMA 5-15P Plug (Input: 100-240V, 50/60 Hz, 1.5A; Output: 48V 1.25A)
• Owner's Manual