Viking
Viking Electronics 250 Watt 70V Sip/Multicast Paging Amplifier (pa-250-ip)
- SKU:
- 18417276
- MPN:
- pa-250-ip
- Availability:
- Usually ships the same or next business day. In stock at our TX warehouse.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 12/24/2025 09:49:34 PM PST
- Stock Update:
- 12/24/2025 09:49:34 PM PST
Description
This item is brand-new, factory sealed.
The Viking model PA-250-IP SIP/Multicast Paging Amplifier provides up to 250 Watts of loud paging for SIP based VoIP phone systems (hardware or hosted/cloud based service provider). The PA-250-IP can be used for standard SIP endpoint paging or multicast paging.
The PA-250-IP can drive up to two hundred fifty (250) 70V speakers and/or paging horns (each speaker set to "1 Watt tap"). The small 1U rack size chassis is possible because the PA-250-IP uses new amplifier technology that is 3 times more efficient than old designs competitors use. The high efficiency of the PA-250-IP means much less heat dissipation, smaller size, higher reliability, and lower cost.
There are many advantages of using a 70V distributed audio paging system, such as being able to put more speakers on a wire run, having longer speaker wire runs, using smaller gauge wire, and being able to set the volume of each speaker independently
The PA-250-IP features individual level controls with LED indicators for each input, automatic peak limiting, multiple amplifier protection modes, an adjustable Automatic Level Control, and Bass & Treble Controls.
The unit easily connects with a single CAT5/6 cable from your network switch. The night ring feature is programmable for time of day and day of week to enable loud ringing for after hour incoming calls.
A 600 Ohm output to allow more paging amplification to be added if needed. The PA-250-IP has inputs for Background Music and Aux Input. The Aux Input allows the addition of another audio source such as a clock-controlled tone generator (Viking model CTG-1A or CTG-2A), or emergency notification system (Viking model DNA-510).
Features
- SIP compliant
- SIP endpoint or multicast group member
- SIP/Multicast: SIP page, SIP page and zoned multicast receive
- Plays audio from standard multicast sources
- Compatible with Polycom multicast paging
- Red "Page/Status" LED indicator
- Network downloadable firmware
- Support for access code to prevent unwanted SIP calls
- Network remote volume control
- Paging prioritization
- Programmable pre-page alert tone
- Powerful 70V amplifier drives up to 250 Watt load
- Door chime trigger input
- Auxiliary and background music inputs
- Individual and master volume controls
- Bass and treble controls
- LEDs show audio level and activity
- Provides loud ringing
- 600 Ohm output to drive additional amplifiers
- Adjustable Automatic Level Control
- Peak limiter and multiple protection modes
- Amplified SIP endpoint or multicast IP paging for: schools, hospitals, retail stores, office spaces, etc.
- Provide multicast background music and sound masking
- Paging systems requiring up to 250 speakers
- Installations that can utilize the below advantages of a 70V distributed audio system:
- Many speakers can be connected on the same wire run to save costs
- Set each speaker's volume individually using its own power taps
Features
Hospital
Store
Office
Country of Origin:
United States
Specs
| Physical Characteristics | |
| Height | 1.8" |
| Width | 19" |
| Depth | 6" |
| Warranty | |
| Limited Warranty | 2 Year |
| General Information | |
| Brand Name | Viking Electronics |
| Manufacturer Website Address | http://www.vikingelectronics.com |
| Marketing Information | The Viking model PA-250-IP SIP/Multicast Paging Amplifier provides up to 250 Watts of loud paging for SIP based VoIP phone systems (hardware or hosted/cloud based service provider). The PA-250-IP can be used for standard SIP endpoint paging or multicast paging. The PA-250-IP can drive up to two hundred fifty (250) 70V speakers and/or paging horns (each speaker set to "1 Watt tap"). The small 1U rack size chassis is possible because the PA-250-IP uses new amplifier technology that is 3 times more efficient than old designs competitors use. The high efficiency of the PA-250-IP means much less heat dissipation, smaller size, higher reliability, and lower cost. There are many advantages of using a 70V distributed audio paging system, such as being able to put more speakers on a wire run, having longer speaker wire runs, using smaller gauge wire, and being able to set the volume of each speaker independently The PA-250-IP features individual level controls with LED indicators for each input, automatic peak limiting, multiple amplifier protection modes, an adjustable Automatic Level Control, and Bass & Treble Controls. The unit easily connects with a single CAT5/6 cable from your network switch. The night ring feature is programmable for time of day and day of week to enable loud ringing for after hour incoming calls. A 600 Ohm output to allow more paging amplification to be added if needed. The PA-250-IP has inputs for Background Music and Aux Input. The Aux Input allows the addition of another audio source such as a clock-controlled tone generator (Viking model CTG-1A or CTG-2A), or emergency notification system (Viking model DNA-510). Features SIP compliant SIP endpoint or multicast group member SIP/Multicast: SIP page, SIP page and zoned multicast receive Plays audio from standard multicast sources Compatible with Polycom multicast paging Red "Page/Status" LED indicator Network downloadable firmware Support for access code to prevent unwanted SIP calls Network remote volume control Paging prioritization Programmable pre-page alert tone Powerful 70V amplifier drives up to 250 Watt load Door chime trigger input Auxiliary and background music inputs Individual and master volume controls Bass and treble controls LEDs show audio level and activity Provides loud ringing 600 Ohm output to drive additional amplifiers Adjustable Automatic Level Control Peak limiter and multiple protection modes Applications Amplified SIP endpoint or multicast IP paging for: schools, hospitals, retail stores, office spaces, etc. Provide multicast background music and sound masking Paging systems requiring up to 250 speakers Installations that can utilize the below advantages of a 70V distributed audio system: - Longer wire runs using smaller gauge speaker wire to save costs - Many speakers can be connected on the same wire run to save costs - Set each speaker's volume individually using its own power taps |
| Product Type | Paging Amplifier |
| Product Name | 250 Watt 70V Sip/Multicast Paging Amplifier |
| Manufacturer | Viking Electronics, Inc |
| Manufacturer Part Number | PA-250-IP |
| Product Model | PA-250-IP |
Warranty Information
