Eaton
Eaton 480W 24V DC DIN Rail Industrial UPS - Hardwire Input/Output (din24480dc)
- SKU:
- 20428588
- MPN:
- din24480dc
- Availability:
- Usually ships the same or next business day. In stock at our CA, MS warehouses.
- Shipping:
- Calculated at Checkout
- Stock Update:
- 04/27/2024 02:37:07 AM PST
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 2 or above | and pay only $163.58 each 163.58 |
- Stock Update:
- 04/27/2024 02:37:07 AM PST
Description
This item is brand-new, factory sealed.
Flexible Power Protection for Smart Industrial Applications
The DIN24480DC standby UPS system with hardwire DC input/output delivers reliable power and battery backup for computing, networking, control and storage equipment in factories, warehouses, edge computing locations and automated manufacturing and fabrication facilities. The rugged compact housing withstands demanding conditions and integrates seamlessly and securely into electrical enclosures in any non-traditional IT environment.
Ideal for Factory Floors and Extreme Temperatures
Get full use of the DIN24480DC's power capacity because there is no derating based on its operating temperature range of 0°C (32°F) to 50°C (122°F), which expands the number of locations in which it can be used. Built to fit into small spaces, the DIN24480DC is a UL 508 recognized component for use in industrial panels. Its pre-installed clamp enables quick mounting to a 35 mm DIN rail. Its fanless design reduces noise and increases reliability.
Reliable Battery Backup Keeps You Operational Through Power Outages
Power outages not only drain productivity from the factory floor, but they also damage expensive equipment. The DIN24480DC protects productivity by providing enough runtime to maintain operation during a brief power outage and protects equipment by allowing it to complete an operation during an extended outage. It also prevents brownouts, overvoltages, surges and line noise from damaging equipment that could destroy data and contribute to costly downtime.
Stay in Control of Your Operation
LEDs on the front panel confirm normal operation and indicate alarm or fault status. Remote on/off can help you avoid maintenance surprises. The DIN24480DC has dry contacts for battery status and UPS communication.
Easy Preventative Maintenance and Initial Troubleshooting
The DIN24480DC requires connection of the BPDIN24XL external battery module (sold separately). Up to four battery modules can be connected to extend backup runtime. The self-test capability can extend the life of the UPS and minimize disruption to operations.
Package Contents:
- DIN24480DC 480VA DIN Rail UPS
- Safety Card
- Owner's Manual
Features
- DIN24480DC 480VA DIN Rail UPS
- Safety Card
- Owner's Manual
Environmental Certification:
REACH
RoHS
RoHS 3
WEEE
Environmentally Friendly:
Yes
Specs
| Power Description | |
| Load Capacity (Watt) | 480 W |
| Output Power Factor | 1 |
| Input Voltage | 24 V DC |
| Output Voltage | 24 V DC |
| Load Capacity (VA) | 480 VA |
| Physical Characteristics | |
| Form Factor | DIN Rail |
| Weight (Approximate) | 14.40 oz |
| Height | 5" |
| Width | 1.5" |
| Depth | 4.8" |
| Warranty | |
| Limited Warranty | 2 Year |
| Controls/Indicators | |
| Status Indicators | <p><b>LED Indicators:</b></p><ul><li> POWER (GREEN)</li><li> LINE MODE ON (SOLID)</li><li> BATTERY MODE (FLASHING)</li><li> FAULT (RED) - FLASHING</li></ul> |
| Interfaces/Ports | |
| EPO Port | Yes |
| Battery Information | |
| Backup/Run Time (Full Load) | 3 Minute |
| DC System Voltage | 24 V DC |
| Battery Chemistry | Lead Acid |
| Backup/Run Time (Half Load) | 10 Minute |
| Battery Characteristics | Valve-regulated |
| Display & Graphics | |
| Display | LED |
| General Information | |
| Brand Name | Eaton |
| Manufacturer Website Address | http://www.eaton.com |
| Marketing Information | Flexible Power Protection for Smart Industrial Applications The DIN24480DC standby UPS system with hardwire DC input/output delivers reliable power and battery backup for computing, networking, control and storage equipment in factories, warehouses, edge computing locations and automated manufacturing and fabrication facilities. The rugged compact housing withstands demanding conditions and integrates seamlessly and securely into electrical enclosures in any non-traditional IT environment. Ideal for Factory Floors and Extreme Temperatures Get full use of the DIN24480DC's power capacity because there is no derating based on its operating temperature range of 0°C (32°F) to 50°C (122°F), which expands the number of locations in which it can be used. Built to fit into small spaces, the DIN24480DC is a UL 508 recognized component for use in industrial panels. Its pre-installed clamp enables quick mounting to a 35 mm DIN rail. Its fanless design reduces noise and increases reliability. Reliable Battery Backup Keeps You Operational Through Power Outages Power outages not only drain productivity from the factory floor, but they also damage expensive equipment. The DIN24480DC protects productivity by providing enough runtime to maintain operation during a brief power outage and protects equipment by allowing it to complete an operation during an extended outage. It also prevents brownouts, overvoltages, surges and line noise from damaging equipment that could destroy data and contribute to costly downtime. Stay in Control of Your Operation LEDs on the front panel confirm normal operation and indicate alarm or fault status. Remote on/off can help you avoid maintenance surprises. The DIN24480DC has dry contacts for battery status and UPS communication. Easy Preventative Maintenance and Initial Troubleshooting The DIN24480DC requires connection of the BPDIN24XL external battery module (sold separately). Up to four battery modules can be connected to extend backup runtime. The self-test capability can extend the life of the UPS and minimize disruption to operations. |
| Product Type | Standby UPS |
| Product Name | DIN24480DC 480VA DIN Rail UPS |
| Manufacturer | Eaton Corporation |
| Manufacturer Part Number | DIN24480DC |
| Product Model | DIN24480DC |
| Technical Information | |
| Receptacle Type | Hardwired |
| Receptacle Detail | 1 x Hardwired |
| Phase | Single Phase |
| Plug/Connector Type | Hardwired |
| Application/Usage |
|
| Environmental Conditions | |
| Sound Emission (A-Weighted) | 40 dB(A) |
| Maximum Operating Temperature | 122°F (50°C) |
| Storage Temperature | 5°F (-15°C) - 104°F (40°C) |
| Maximum Operating Elevation | 6561 ft |
Warranty Information
